Screen Control Command; Cf_Screen Command; Cf_Dzcent Command - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications

8.7 Screen Control Command

8.7.1

CF_SCREEN Command

Command "CF_SCREEN_%1"[CR]
Input is
Computer
%1
Input is
Video
AV / PC
Common
Select image size on screen.
When Input specified by %1 is inappropriate for selected Input, the projector
returns "101" [CR] and the command is not executed.
Details "DZOOM UP" and "DZOOM DN" start effecting from the first command.
This command is available in normal Power ON status.
Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered,
the signal recognized as Video Input.
Acceptable
Response
Unacceptable
8.7.2

CF_DZCENT Command

Command "CF_DZCENT_%1"[CR]
%1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER")
Cancel Digital Zoom
When image is expanded or shrunk, reset its value.
Details
This command is available in normal Power ON status and when Input is
Computer.
Acceptable
Response
Unacceptable
"NORMAL" -------------------- Select Normal mode
"FULL" ------------------------- Select Full screen mode
"WIDE" ------------------------- Select Wide mode
"ZOOM" ------------------------ Select Zoom mode
"TRUE" ------------------------- Select True mode
"CUSTOM" -------------------- Select Custom mode
"DZOOM_UP" ---------------- Expand image size with Digital Zoom
"DZOOM_DN" ---------------- Reduce image size with Digital Zoom
"UP" ------------------------ The same operation as pressing Up key
"DN" ------------------------ The same operation as pressing
"NORMAL" ---------------------- Select Normal mode
"FULL" --------------------------- Select Full mode
"WIDE" --------------------------- Select Wide mode
"ZOOM" -------------------------- Select Zoom mode
"CUSTOM" ---------------------- Select Custom size
"UP" ------------------------ The same operation as pressing Up key
"DN" ------------------------ The same operation as pressing Down
RST ------------------------ Reset screen adjustment 0
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
27/72
or Left key
Down key or Right key
or Left key
key or Right key