Cf_Pcmodefree Command - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications
8.5.7

CF_PCMODEFREE Command

Command "CF_PCMODEFREE_%1"[CR]
"MODE1" ------ Set Mode1 to Free status
"MODE2" ------ Set Mode2 to Free status
"MODE3" ------ Set Mode3 to Free status
"MODE4" ------ Set Mode4 to Free status
"MODE5" ------ Set Mode5 to Free status
%1
"MODE6" ------ Set Mode6 to Free status
"MODE7" ------ Set Mode7 to Free status
"MODE8" ------ Set Mode8 to Free status
"MODE9" ------ Set Mode9 to Free status
"MODE10" ---- Set Mode10 to Free status
Delete the registered data in Mode1-Mode5 and turns it to Free status.
This command operates the same as turning Mode1-Mode5 to Free in PC Adjust
Details
Menu.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
23/72