Connecting The Various Control Terminal - NEC NC800C Installation Manual

NC800C
3.2

Connecting the various control terminal

For control, your projector comes with such ports as the PC control terminal and the Ethernet
port (RJ-45).
PC control terminal
(PC CONTROL)
Ethernet port
(LAN 1/LAN 2)
Touch panel port
(TOUCH PANEL)
RS-232C
Use this terminal when controlling the projector in serial
connection from a PC.
Use this port when controlling the projector in LAN connection
from a PC.
Use this to use the touch panel controller (separately sold).
LAN cable
Ferrite core (appending)
3. Connecting to the Projector
E-27