Mounting The Anamorphic Lens And Its Holder - NEC NC800C Installation Manual

NC800C
2.4

Mounting the Anamorphic Lens and Its Holder

An optional 1.25x anamorphic lens Model AL1.25/AL1.25-E are required for film projection in
a wide-screen, CinemaScopic movie format on the DLP Cinema Projector Model NC800C. A
dedicated, stand-type anamorphic lens holder Model AS1.25/AS1.25-E are optionally
available for mounting this lens. See also the instruction manual for the lens holder.
Names of the Components
Tilt angle
adjusting knob
Y-direction
setscrew
Pan angle adjusting/
fixing screw (P2)
Pan angle adjusting/
fixing screw (P1)
E-20
X-direction operating grip
Y-direction adjusting knob
Anamorphic lens holder screw
Tilt angle fixing screw
2. Setting Up Your Projector
X- direction fixing lever
X-direction topper
Z-direction
setscrew
Z-direction
setscrew