Important Information - NEC NC800C Installation Manual

NC800C
WARNING
TO PREVENT FIRE, SHOCK, OR OTHER
HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE. ALSO DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH
AN EXTENSION CORD RECEPTACLE OR
OTHER OUTLETS, UNLESS THE PRONGS CAN
BE FULLY INSERTED. REFRAIN FROM
OPENING THE CABINET AS THERE ARE
HIGH-VOLTAGE COMPONENTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT OPEN COVER. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore, it
is dangerous to make any kind of contact
with any part inside of this unit.
This symbol alerts the user that important
literature
and maintenance of this unit has been
included. Therefore, it should be read
carefully in order to avoid any problems.
DOC compliance Notice
This Class A digital apparatus meets
all requirements of the Canadian Interference-
Causing Equipment Regulations.
Precautions: Please read this manual
carefully before using your NC800C
and keep the manual handy for future
reference.
E-2
CAUTION
concerning the operation
WARNING
This is a Class A product. In a domestic
environment this product may cause
radio interference in which case the
user may be required to take adequate
measures.
CAUTION
• In order to reduce any interference
with radio and television reception use a
signal cable with ferrite core attached.
Use of signal cables without a ferrite
core attached may cause interference
with radio and television reception.
• This equipment has been tested and
found to comply with the limits for a
Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the installation manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required
to correct the interference at his own
expense.
Important Safeguards
These safety instructions are to ensure the
long life of your projector and to prevent
fire and shock. Please read them carefully
and heed all warnings.
Installation
1. Continual place the projector on a
flat, level surface in a dry area away
from dust and moisture. Tilting the
front of the projector up or down
could reduce lamp life. Do not put
the projector on its side when the
lamp is on. Doing so may cause
damage to the projector.

Important Information