NC800C
3.3
Controlling Your Projector Using a Wireless LAN Card
When using a wireless LAN to control the projector, please insert a wireless LAN card
(available separately) into the Connection terminal PC Card slot located at the projector side.
• If the wireless LAN card is in use, NC800C cannot be controlled from the incorporated LAN
Note
port (LAN A/LAN B). The Cinema circuit can be controlled even if the wireless LAN is in
use.
• Be sure to set or remove your wireless LAN card only when the power to your projector is
off. Insertion or removal of a wireless LAN card when power to your projector is on may
result in a destruction of the wireless LAN card.
E-28
3. Connecting to the Projector