Setting Up Your Projector; Connecting The Power Cord - NEC NC800C Installation Manual

2.
Setting Up Your
Projector

Connecting the Power Cord

2.1
After making sure that the main power switch of your projector is turned off, plug its power
cord into an earthed, three-pin power outlet (power supply: 100-120 VAC or 200-240 VAC).
• Consult your dealer for installing the power cable to the projector. Do not
install the power cable by yourself.
• For equipment safety, be sure to provide ground connection. To prevent
the risk of electric shock, grounding must be conducted by a qualified
Caution
electrician. Make sure to connect the grounding conductor before plugging
the power connector.
Plug to a 100-120 VAC or 200-240 VAC
three-pin power outlet.
E-13