Installation - NEC NC800C Installation Manual

NC800C
FactoryDefault
Used to select factory default values for the projector settings.
M Key & Title
All
5.4.3

Installation

This menu is the service personnel menu. For the using service personnel menu, refer to "5.1.
When you use the service personnel menu" (Page E-36).
Image Orient
Make a selection according to the setup position of your projector and screen.
Normal-F
UpsideDown-R
Normal-R
UpsideDown-F
Lens Center
To move the lens shift to the center position. The center position may slightly shift depending
upon mounting conditions of the lens.
← Select the item to be reset.
← Press the ENTER button to execute resetting.
Titles are set to factory default ones. (Tiles you have created are
deleted, but files are not.)
All the settings of your projector are set to factory default values except
for files.
← Displays the currently selected item with asterisk (*).
← Displays the setting
Projection is made from front of the screen.
The projector body is installed upside down, and projection is
made from the back of the screen.
Projection is made from behind the screen
The projector body is installed upside down, and projection is
made from the front of the screen.
← Press the ENTER button to execute moving.
5. LCD Menu
E-41