Memory; Title Setup; Macro Key - NEC NC800C Installation Manual

NC800C
5.4.4

Memory

This menu is the service personnel menu. For the using service personnel menu, refer to "5.1.
When you use the service personnel menu" (Page E-36).
Save the current status of lamp and lens to the memory in the projector (lens memory
function and lamp memory function).
The saved contents are assigned to the titles for use.
Press the ENTER button to display the confirmation message asking you whether this
memory can be overwritten or not.
Lamp
Lens
5.5

Title Setup

This menu is the service personnel menu. For the using service personnel menu, refer to"5.1.
When you use the service personnel menu" (Page E-36).
5.5.1

Macro Key

Use this key to set the titles to be assigned to the macro keys.
You cannot assign the same title to several macro keys. If you want to assign any title to
another number, cancel the assignment once and then set it to any key again.
Select the titles from those registered in advance.
To clear assignment to macro keys, select "---".
← Select the saving item
← Display the registered memory name
To save the current lamp status
To save the current lens status
← Select the macro key number (1 to 8)
← Display the selected number of the title
← Select the titles to be assigned to the macro keys
5. LCD Menu
E-43