NEC NC800C Installation Manual page 22

NC800C
Slide the anamorphic lens
[3]
mount toward the side where
it does not come in front of
the primary lens of the
projector. Lock the levers to
fix the mount.
To slide the lens mount, turn the x-direction
fixing levers counterclockwise to unlock them.
After sliding, lock the levers to fix the mount.
Untighten the M6 hexagon
[4]
head screw for anamorphic
lens mount. Mount the
anamorphic lens to the mount
with its orientation as
illustrated below, then
retighten the mount screw.
E-22
2. Setting Up Your Projector
M6 hexagon head screw for
anamorphic lens holder