Connecting To Other Equipment; ❶ Mounting A Lens (Sold Separately); Part Names Of The Lens Mount - NEC PX602UL-BK User Manual

6. Connecting to Other Equipment

❶ Mounting a lens (sold separately)
This projector can be used with 3 kinds of optional lenses (sold separately). The chart below shows compatible lenses
according to the projector model. The descriptions here are for the NP35ZL (standard zoom) lens. Mount other lenses
in the same manner. See page
Projector (model name)
PX602UL-WH/PX602UL-BK
PX602WL-WH/PX602WL-BK
Yes = can be mounted, No = cannot be mounted
WARNING:
(1) Turn off the power and wait for the cooling fan to stop, (2) turn off the main power switch, (3) disconnect the
power cord and wait for the unit to cool before mounting or removing the lens. Failure to do so can result in eye
injury, electric shock, or burn injuries.
NOTE:
• The projector and lenses are made of precision parts. Do not subject them to shock or excessive forces.
• Remove the separately sold lens when moving the projector. If not, the lens could be subject to shock while the projector is being
moved, damaging the lens and the lens shift mechanism.
• When dismounting the lens from the projector, return the lens position to the home position before turning off the power. Failure
to do so may prevent the lens from being mounted or dismounted because of narrow space between the projector and the lens.
• Never touch the lens surface while the projector is operating.
• Be very careful not to let dirt, grease, etc., on the lens surface and not to scratch the lens surface.
• Perform these operations on a flat surface over a piece of cloth, etc., to prevent the lens from getting scratched.
• When leaving the lens off the projector for long periods of time, mount the dust cap on the projector to prevent dust or dirt from
getting inside. If the lens remains detached from the projector for long periods of time, dust may collect within the optical unit
and damage the lens, causing deterioration of projected image.
• Other types of lenses cannot be mounted on this projector. The NP34ZL/NP35ZL/NP36ZL/NP37ZL series of lenses cannot be
mounted onto other projector models.

Part Names of the Lens Mount

Attaching the Lens Mount
Rotate and align the 3 flanges on the lens with the 3 flange catches on the lens mount. The lens can be secured to
the mount using a lock mechanism.
Catch
(3 places)
Front panel
Protective cap
164 for lens options.
NP34ZL
Short focus zoom
Yes
Yes
Mount lock
Hook (3 places)
Lens hood
Lens (model)
NP35ZL
Standard zoom Standard zoom
Yes
Yes
Locking screw
Lock release button
Lens cap
121
NP36ZL NP37ZL
Long focus zoom
No
Yes
Flange
(3 places)
"TOP" orientation indicator
Lens cap
Lens
Yes
Yes