Printhead Removal; Printhead Erase Led Assembly Removal - Lexmark 11A4006 - Optra K 1220 B/W Laser Printer Service Manual

Printhead Removal

1. Remove the upper cover.
2. Disconnect the connector from the printhead assembly.
3. Remove the printhead cover and the printhead assembly (3
screws).

Printhead Erase LED Assembly Removal

1. Remove the upper cover.
2. Remove the printhead.
3. Open the controller card door assembly.
4. Disconnect the printhead erase LED assembly cable from the
engine card.
5. Pull the ends of the printhead erase LED assembly forward to
unlatch it from the frame assembly.
6. Remove the printhead erase LED assembly.
Repair Information 4-27