3. Diagnostic Aids
This chapter explains the tests and procedures to identify printer fail-
ures and verify repairs have corrected the problem.
To run the printer diagnostic tests described in this chapter, you must
put the printer in Diagnostic Mode.
Diagnostic Mode
To enter the Diagnostic Mode:
1. Turn the printer off.
2. Press and hold the Go and Return buttons.
3. Turn the printer on.
4. Release the buttons when "Performing Self Test" displays on the
operator panel.
The tests display on the operator panel in the order shown:
•
Device Tests
•
Print Registration
•
Print Tests
•
Hardware Tests
•
Input Tray Tests
•
Base Sensor Tests
•
Printer Setup
•
Error Log
Exiting the Diagnostic Mode
Select Exit Diagnostics to exit the Diagnostic Mode and return to
normal mode.
Diagnostic Aids 3-1