Lexmark 11A4006 - Optra K 1220 B/W Laser Printer Service Manual page 37

User Error Message
53 Unformatted Flash
54 Standard Serial Error
54 Serial Option X Error
56 Standard Serial
Disabled
56 Parallel Port Disabled
61 Defective Disk
62 Disk Full
Explanation
This message is displayed when the printer
detects an unformatted flash at power on. Press
Go to clear the message. The flash is marked as
bad and normal operation continues. Flash
operations are not allowed until the flash is
formatted.
This error is displayed when a serial error
(framing or parity) is detected on the standard
serial port. This usually indicates the serial port is
not set up correctly.
This error is displayed when a serial error
(framing or parity) is detected on the optional
serial port. This usually indicates the optional
serial port is not set up correctly.
This error is displayed when data is sent to the
printer across the standard serial port, but the
port has been disabled.
This error is displayed when data is sent to the
printer across the parallel port, but the parallel
port has been disabled. Once this message is
displayed, reporting of further errors is
suppressed until the menus are entered, or the
printer is reset.
This error code is displayed when the printer
detects a defective disk. This error may occur at
power on or during disk format and write
operations. The following actions may be taken
while this message is displayed: Press Go to clear
the message. The disk is marked defective and
normal printer operations continue. Disk
operations are not allowed with a defective disk.
The Format Disk menu is not shown.
This error code is displayed when there is not
enough free space on the disk to hold the
resources that have been requested to be written
to the disk. This message displays for both
resource and PostScript Disk operators when the
disk is full.
Diagnostic Information 2-7