Supported Hardware And Software; What's New In This Document - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Supported Hardware and Software

This document supports the following platforms:
•
•
•
•
•
•
•
In those instances in which procedures or parts of procedures documented here apply to some
switches but not to others, this guide identifies exactly which switches are supported and which are
not.
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for Fabric OS 6.1.0, documenting all possible
configurations and scenarios is beyond the scope of this document; however, this document does
specify when procedures or parts of procedures apply only to specific switches.
This document does not support all Fabric OS versions. This document is specific to Fabric OS
6.1.0. To obtain information about an OS version other than 6.1.0, see the documentation specific
to that OS version.

What's New in This Document

The following changes have been made since this document was last released:
•
vi
Brocade 200E switch
Brocade 300 switch
Brocade 4100 switch
Brocade 4900 switch
Brocade 5000 switch
Brocade 5100 switch
Brocade 5300 switch
Added support for new Brocade switches: 300, 5100, 5300.
EZSwitchSetup Administrator's Guide
53-1000607-02