Changing Switch Information - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

3
Managing the switch
FIGURE 29
In addition to switch information, this page also displays:
•
•

Changing switch information

From the Switch Manager, you can relaunch the EZSwitchSetup Switch Configuration to perform
the following tasks:
•
•
•
•
This is the same wizard that was launched the first time you set up the switch.
1. Click Setup under Switch in the task panel.
2. Follow the instructions in the wizard.
32
Detail view of switch information
Ethernet information
Fibre channel information
Change the switch name
Change the switch time
Change the admin password
Change the zoning configuration type
The Switch Configuration launches.
You can optionally change the switch name, switch time, and admin password. When
prompted, you must select a zoning configuration.
EZSwitchSetup Administrator's Guide
53-1000607-02