Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 24

Setting a static IP address
If you need to set up a static IP address, take the following steps.
1. Select Yes under Do you want to set a static IP address to the switch? (see
2. Click Continue.
3. Enter the static IP addresses you want to use.
4. Click Continue.
EZSwitchSetup Administrator's Guide
53-1000607-02
FIGURE 9
Assign a static IP
A dialog box is displayed.
EZSwitchSetup verifies that the IP addresses are available to use on the network and sets the
IP addresses on to the switch. When the IP addresses are verified and set, the Confirmation
screen displays (see Figure 10
Setting the switch IP address
on page 14).
2
Figure 9).
13