2
Setting the switch IP address
3. Click Next to start the discovery process.
4. If you do not need to set a static IP address, click Continue to accept the assigned addresses.
12
FIGURE 8
Ethernet switch discovery
When EZSwitchSetup discovers the switch, it displays the IP addresses (IPv4 and IPv6) on the
screen.
If you have a DHCP server on the same subnet as the Brocade switch, the IP address is the one
provided by the DHCP server.
If you do not have a DHCP server, the default or existing IP address configuration is displayed.
The confirmation screen is displayed (see
If you need to set a static IP address, see
Figure 10
on page 14).
"Setting a static IP address"
EZSwitchSetup Administrator's Guide
on page 13
53-1000607-02