About This Document
●
Audience......................................................................................................................... 11
●
Supported hardware and software.................................................................................. 11
●
How command information is presented in this guide.....................................................12
●
Notice to the reader.........................................................................................................13
●
Related publications........................................................................................................13
Audience
This document is designed for system administrators with a working knowledge of Layer 2 and Layer 3
switching and routing.
If you are using a Brocade device, you should be familiar with the following protocols if applicable to
your network - IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, MPLS, and VRRP.
Supported hardware and software
The following hardware platforms are supported by this release of this guide:
TABLE 1
NetIron CES 2000 and NetIron CER 2000 Series
Brocade NetIron CES 2024C
Brocade NetIron CES 2024C-4X
Brocade NetIron CER 2024C-4X-RT
Brocade NetIron CES 2024F
Brocade NetIron CES 2024F-4X
Brocade NetIron CER 2024F-4X-RT
Brocade NetIron CES 2048C
Brocade NetIron CES 2048CX
Brocade NetIron CES 2048F
Brocade NetIron CES 2048FX
Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide
53-1003823-01
Supported devices
Supported
Notes
Yes
EOL initiated
Yes
Yes
Yes
Yes
Yes
Yes
Yes
EOL initiated
Yes
Yes
EOL initiated
11