Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 31

2
Connecting devices and completing the setup
2. Connect Fibre Channel cables from the switch to your host and storage devices. Ensure that
20
I O
I O
I
1
2
I O
I O
I
1
1 Brocade switch
2 Open the SFP bale
FIGURE 15
Installing SFPs
the physical connections are exactly as indicated on the Device Connection screen.
a. Remove any plastic protectors from the Fibre Channel cable ends, and position the cable
connector so that it is oriented correctly.
b. Insert the cable connector into the SFP until it is firmly seated and the latching mechanism
clicks.
!
3
scale: 1/2" = 1"
!
4
3 Position SFP and insert until firmly seated
4 Close the latching bale
A
B
EZSwitchSetup Administrator's Guide
53-1000607-02