FIGURE 32
Device connections
EZSwitchSetup Switch Manager displays a graphical representation of the switch and the devices
that are connected to each port.
1. Click Display Connections under Devices in the task panel.
If Typical zoning is set on the switch, Switch Manager validates the connections and displays
whether the connections are valid or invalid.
EZSwitchSetup Administrator's Guide
53-1000607-02
Detailed Device Information
A graphical representation of the switch and connections displays, as shown in
page 36. This is a real-time display; the connections are updated automatically as you connect
and disconnect HBAs and storage.
Managing devices
Figure 33
3
on
35