Enable Inactive Ports - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Enable inactive ports

EZSwitchSetup Switch Manager allows you to enable Ports On Demand (POD) if you have a license
available.
1. Click Enable Inactive Ports under Switch in the task panel.
2. Enter the license key to add the additional ports.
3. Click Add.
EZSwitchSetup Administrator's Guide
53-1000607-02
A dialog box is displayed.
FIGURE 30
Add Ports On Demand
The ports are now enabled.
Managing the switch
3
33