Sec-3001; Sec-3002; Audit Sec System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

AUDIT SEC System Messages

SEC-3001

Message
AUDIT, <timestamp>, [SEC-3001], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Security mode
<State change: Enabled or Disabled> on the fabric.
Probable Cause Indicates that the security mode of the fabric was either enabled or disabled.
Recommended Verify that the security mode change was planned. If the security mode change was planned, no
Action action is required. If the security mode change was not planned, take appropriate action as defined
by your enterprise security policy.
Severity INFO

SEC-3002

Message
AUDIT, <timestamp>, [SEC-3002], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Event Related
Info>.
Probable Cause Indicates that the specified security event has occurred. The Event Name can be one of the
following:
Recommended Verify that the security event was planned. If the security event was planned, no action is required.
Action If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
Fabric OS Message Reference
53-1000600-01
-
There has been an fabric configurations server (FCS) failover.
-
A security policy has been activated.
-
A security policy has been saved.
-
A security policy has been aborted.
-
A non-FCS password has changed.
Chapter
84
499