Pswp-1001; Pswp-1002; Pswp-1003; Pswp System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade error message reference guide v6.0.0 (53-1000600-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
PSWP System Messages
PSWP-1001
Message
<timestamp>, [PSWP-1001], <sequence-number>,, INFO, <system-name>, Areas for port
<wwn name corresponding to source port> and port <wwn name corresponding to
destination port> are swapped. New area for port <wwn name corresponding to source
port> is <wwn name corresponding to destination port> and port <new area
corresponding to source wwn> is <new area corresponding to destination wwn>.
Probable Cause
Indicates that the portSwap command has been issued.
Recommended
No action is required.
Action
Severity
INFO
PSWP-1002
Message
<timestamp>, [PSWP-1002], <sequence-number>,, INFO, <system-name>, Port Swap
feature enabled.
Probable Cause
Indicates that the portSwap feature has been enabled in the switch.
Recommended
No action is required.
Action
Severity
INFO
PSWP-1003
Message
<timestamp>, [PSWP-1003], <sequence-number>,, INFO, <system-name>, Port Swap
feature disabled.
Probable Cause
Indicates that the portSwap feature has been disabled in the switch.
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
53-1000600-01
Chapter
59
351
Advertisement
Table of Contents
