Fw-1128; Fw-1129; Fw-1130 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

29

FW-1128

FW-1128
Message
<timestamp>, [FW-1128], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of segmentations has changed from a value outside of the acceptable
range to a value within the acceptable range. Segmentation changes might occur due to:
•
•
•
•
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1129

Message
<timestamp>, [FW-1129], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of zone changes has changed. Zone changes occur when there is a
change to the effective zone configuration.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1130

Message
<timestamp>, [FW-1130], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur
when there is a change to the effective zone configuration. A low number of zone configuration
changes means that the fabric is functioning normally.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
184
Zone conflicts.
Domain conflicts.
Segmentation of the principal link between two switches.
Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Fabric OS Message Reference
53-1000600-01