Fw-1298; Fw-1299; Fw-1300 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade error message reference guide v6.0.0 (53-1000600-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
29
FW-1298
FW-1298
Message
<timestamp>, [FW-1298], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of telnet violations has risen above the high boundary. Telnet violations
indicate that a telnet connection request has been received from an unauthorized IP address. The
TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish
telnet connections to switches in the fabric.
Recommended
Run the errShow command to determine the IP address that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
WARNING
FW-1299
Message
<timestamp>, [FW-1299], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of telnet violations has changed from a value outside of the acceptable
range to a value within the acceptable range. Telnet violations indicate that a telnet connection
request has been received from an unauthorized IP address. The TELNET_POLICY contains a list of
internet protocol (IP) addresses that are authorized to establish telnet connections to switches in
the fabric.
Recommended
No action is required.
Action
Severity
INFO
FW-1300
Message
<timestamp>, [FW-1300], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of hypertext transfer protocol (HTTP) violations has changed. HTTP
violations indicate that a browser connection request has been received from an unauthorized IP
address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to
establish browser connections to the switches in the fabric.
Recommended
Run the errShow command to determine the IP address that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
INFO
208
Fabric OS Message Reference
53-1000600-01
Advertisement
Table of Contents
