Rpcd-1001; Rpcd-1002; Rpcd-1003; Rpcd System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade error message reference guide v6.0.0 (53-1000600-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
RPCD System Messages
RPCD-1001
Message
<timestamp>, [RPCD-1001], <sequence-number>,, WARNING, <system-name>,
Authentication Error: client \"<IP address>\" has bad credentials: <bad user name
and password pair>
Probable Cause
Indicates that an authentication error was reported. The specified client IP address has faulty
credentials.
Recommended
Enter the correct user name and password from the Fabric Access API host.
Action
Severity
WARNING
RPCD-1002
Message
<timestamp>, [RPCD-1002], <sequence-number>,, WARNING, <system-name>, Missing
certificate file. Secure RPCd is disabled.
Probable Cause
Indicates that an SSL certificate is missing.
Recommended
To enable RPCD in Secure mode, install a valid SSL certificate on the switch.
Action
Severity
WARNING
RPCD-1003
Message
<timestamp>, [RPCD-1003], <sequence-number>,, WARNING, <system-name>, Permission
denied accessing certificate file. Secure RPCd is disabled.
Probable Cause
Indicates that the SSL certificate file configured on the switch could not be accessed because root
did not have read-level access.
Recommended
Change the file system access level for the certificate file to have root read-level access.
Action
Severity
WARNING
Fabric OS Message Reference
53-1000600-01
Chapter
62
361
Advertisement
Table of Contents
