Ficn-1073; Ficn-1074; Ficn-1075 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade error message reference guide v6.0.0 (53-1000600-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
FICN-1073
Message
<timestamp>, [FICN-1073], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Unloaded:Path=<FICON PATH>:states=0x<4 prior emulation
states>:cmds=0x<last 4 commands received from the channel for this
device>:status=0x<last 4 status values sent to the channel for this
device>:flags=0x<tape report bit flags>.
Probable Cause
A Rewind and Unload IO has been processed from a locally connected LPAR, which indicates that a
tape should be unloaded on a device.
Recommended
No action is required.
Action
Severity
INFO
FICN-1074
Message
<timestamp>, [FICN-1074], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:WriteReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host write commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated write megabytes processed while this tape was loaded>.
Probable Cause
A Rewind and Unload IO has been processed from a locally connected LPAR and write pipelining
was performed on the currently loaded tape.
Recommended
No action is required.
Action
Severity
INFO
FICN-1075
Message
<timestamp>, [FICN-1075], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:ReadBlkReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host read commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated read megabytes processed while this tape was loaded>.
Probable Cause
A Rewind and Unload IO has been processed from a locally connected LPAR and Read Block
pipelining was performed on the currently loaded tape.
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
53-1000600-01
22
FICN-1073
145
Advertisement
Table of Contents
