Fw-1301; Fw-1302; Fw-1303 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual
Brocade error message reference guide v6.0.0 (53-1000600-01, april 2008)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
FW-1301
Message
<timestamp>, [FW-1301], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of hypertext transfer protocol (HTTP) violations has fallen below the low
boundary. HTTP violations indicate that a browser connection request has been received from an
unauthorized IP address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that
are authorized to establish browser connections to the switches in the fabric.
Recommended
No action is required.
Action
Severity
INFO
FW-1302
Message
<timestamp>, [FW-1302], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of hypertext transfer protocol (HTTP) violations has risen above the high
boundary. HTTP violations indicate that a browser connection request has been received from an
unauthorized IP address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that
are authorized to establish browser connections to the switches in the fabric.
Recommended
Run the errShow command to determine the IP address that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
WARNING
FW-1303
Message
<timestamp>, [FW-1303], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of hypertext transfer protocol (HTTP) violations has changed from a value
outside of the acceptable range to a value within the acceptable range. HTTP violations indicate
that a browser connection request has been received from an unauthorized IP address. The
HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish
browser connections to the switches in the fabric.
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
53-1000600-01
29
FW-1301
209
Advertisement
Table of Contents
