Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
To set up the SSL function on the Switch, configure the parameters in the SSL Settings section described.
The fields that can be configured are described below:
Parameter
SSL Status
Cache Timeout (60-
86400)
Click the Apply button to accept the changes made.
To set up the SSL cipher suite function on the Switch, configure the parameters in the SSL Cipher suite Settings
section described below:
Parameter
RSA with
RC4_128_MD5
RSA with 3DES EDE
CBC SHA
DHS DSS with 3DES
EDE CBC SHA
RSA EXPORT with RC4
40 MD5
Click the Apply button to accept the changes made.
To download SSL certificates, configure the parameters in the SSL Certificate Download section described below.
Parameter
Server IP Address
Figure 8-73 SSL Settings window
Description
Use the radio buttons to enable or disable the SSL status on the Switch. The default
is Disabled.
This field will set the time between a new key exchange between a client and a host
using the SSL function. A new SSL session is established every time the client and
host go through a key exchange. Specifying a longer timeout will allow the SSL
session to reuse the master key on future connections with that particular host,
therefore speeding up the negotiation process. The default setting is 600 seconds.
Description
This cipher suite combines the RSA key exchange, stream cipher RC4 encryption
with 128-bit keys and the MD5 Hash Algorithm. Use the radio buttons to enable or
disable this cipher suite. This field is Enabled by default.
This cipher suite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm. Use the radio buttons to enable or disable
this cipher suite. This field is Enabled by default.
This cipher suite combines the DSA Diffie Hellman key exchange, CBC Block
Cipher 3DES_EDE encryption and SHA Hash Algorithm. Use the radio buttons to
enable or disable this cipher suite. This field is Enabled by default.
This cipher suite combines the RSA Export key exchange and stream cipher RC4
encryption with 40-bit keys. Use the radio buttons to enable or disable this cipher
suite. This field is Enabled by default.
Description
Enter the IPv4 address of the TFTP server where the certificate files are located.
381
Advertisement
Table of Contents
