Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Port
MAC Address
IP Address
Click the Find by Port button to locate a specific entry based on the port number selected.
Click the Find by MAC button to locate a specific entry based on the MAC address entered.
Click the Find by IP Address button to locate a specific entry based on the IP address entered.
Click the View All Entries button to display all the existing entries.
Click the Add to IP MAC Port Binding Table to add the specific entry to the IMPB Entry Settings window.
L2 Multicast Control
IGMP Proxy
Based on IGMP forwarding, the IGMP proxy runs the host part of IGMP on the upstream and router part of IGMP
on the downstream, and replicates multicast traffic across VLANs on devices such as the edge boxes. It reduces
the number of the IGMP control packets transmitted to the core network.
IGMP Proxy Settings
This window is used to configure the IGMP proxy state and IGMP proxy upstream interface in this page.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Proxy > IGMP Proxy Settings,
as show below:
The fields that can be configured are described below:
Parameter
IGMP Proxy State
VLAN Name
Description
Select the unit you want to configure.
Select the port number to use for this configuration.
Enter the MAC address to use for this configuration.
Enter the IP address the use for this configuration.
Figure 4-50 IGMP Proxy Settings window
Description
Use the radio buttons to enable or disable the IGMP Proxy Global State.
Click the radio button and enter the VLAN name for the interface.
102
Advertisement
Table of Contents
