Nd Snooping - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Port
Ports
Click the Find button to locate a specific entry based on the port number selected.
Click the Clear button to clear all the information entered in the fields.
Click the View All button to display all the existing entries.

ND Snooping

ND Snooping Maximum Entry Settings
Users can configure the maximum ND Snooping entry for ports on this page.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > ND Snooping > ND Snooping Maximum
Entry Settings as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Maximum Entry (1-50)
Description
Select the unit you want to configure.
Use the drop-down menu to select the desired port.
Specify the ports for DHCP snooping entries. Tick the All Ports check box to select
all entries for all ports. Tick the IPv4 check box to select IPv4 DHCP snooping
learned entries. Tick the IPv6 check box to select IPv6 DHCP snooping learned
entries..
Figure 8-32 ND Snooping Maximum Entry Settings window
Description
Select the unit you want to configure.
Use the drop-down menus to select a range of ports that require a restriction on the
maximum number of entries that can be learned with ND snooping.
Enter the maximum entry value. Tick the No Limit check box to have unlimited
341