Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
sFlow State
Click the Apply button to accept the changes made.
sFlow Analyzer Server Settings
The Switch can support 4 different Analyzer Servers at the same time and each sampler or poller can select a
collector to send the samples. We can send different samples from different samplers or pollers to different
collectors.
To view this window, click Monitoring > sFlow > sFlow Analyzer Server Settings as shown below:
The fields that can be configured are described below:
Parameter
Analyzer Server ID (1-
4)
Owner Name
Timeout (1-2000000)
Collector (IPv6)
Address
Collector Port (1-
65535)
Max Datagram Size
(300-1400)
Click the Apply button to accept the changes made.
Figure 11-20 sFlow Global Settings window
Description
Click the radio buttons to enable or disable the sFlow feature.
Figure 11-21 sFlow Analyzer Server Settings window
Description
The analyzer server ID specifies the ID of a server analyzer where the packet will be
forwarded.
The entity making use of this sFlow analyzer server. When owner is set or modified,
the timeout value will become 400 automatically.
The length of time before the server times out. When the analyzer server times out,
all of the flow samplers and counter pollers associated with this analyzer server will
be deleted. If not specified, its default value is 400. Tick the Infinite check box to
have unlimited time.
The IP address of the analyzer server. If not specified or set a 0 address, the entry
will be inactive.
The destination UDP port for sending the sFlow datagrams. If not specified, the
default value is 6343.
The maximum number of data bytes that can be packed in a single sample datagram.
If not specified, the default value is 1400.
443
Advertisement
Table of Contents
