D-Link DGS-3620-28PC-SI Product Manual page 274

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured or displayed are described below:
Parameter
Unit
From Port / To Port
Type
No Limit
Rate (64-10240000)
Effective RX
Effective TX
Click the Apply button to accept the changes made.
Figure 6-4 Bandwidth Control Settings window
Description
Select the unit you want to configure.
Use the drop-down menu to select the port range to use for this configuration.
This drop-down menu allows a selection between RX (receive), TX (transmit), and
Both. This setting will determine whether the bandwidth ceiling is applied to receiving,
transmitting, or both receiving and transmitting packets.
This drop-down menu allows the user to specify that the selected port will have no
bandwidth limit or not.
NOTE: If the configured number is larger than the port speed, it means no bandwidth
limit.
This field allows the input of the data rate that will be the limit for the selected port. The
user may choose a rate between 64 and 10240000 Kbits per second.
If a RADIUS server has assigned the RX bandwidth, then it will be the effective RX
bandwidth. The authentication with the RADIUS sever can be per port or per user. For
per user authentication, there may be multiple RX bandwidths assigned if there are
multiple users attached to this specific port. The final RX bandwidth will be the largest
one among these multiple RX bandwidths.
If a RADIUS server has assigned the TX bandwidth, then it will be the effective TX
bandwidth. The authentication with the RADIUS sever can be per port or per user. For
per user authentication, there may be multiple TX bandwidths assigned if there are
multiple users attached to this specific port. The final TX bandwidth will be the largest
one among these multiple TX bandwidths.
264