D-Link DGS-3620-28PC-SI Product Manual page 426

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Click the Edit button to re-configure the specific entry.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Edit button, the following page will appear:
The fields that can be configured are described below:
Parameter
MEP State
CCM State
Figure 10-6 CFM MEP Information Window
Figure 10-7 CFM MEP Information (Edit) Window
Description
This is the MEP administrative state.
Enable - MEP is enabled.
Disable - MEP is disabled. This is the default value.
This is the CCM transmission state.
Enable - CCM transmission enabled.
Disable - CCM transmission disabled. This is the default value.
416