Table of Contents
Advertisement
Date & time: The Date & time suffix is added to the
image file name.
The Date & time suffix consists of the year (2 digits),
month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits), second (2 digits) and sequential
number (2 digits), thus adding a 14-digit number to
the image file name.
Sequence number: A sequential number of 10 digits
between 0000000001 and 4294967295 and an
sequential 2 - digit number is added to the image file
name.
Tip
A sequential number added to Date & time and
Sequence number is used to identify individual files
created with consecutive alarm events.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the alarm to be linked with the recording of image
and audio files.
Tip
Number of selectable input terminals is as follows:
SNT-EX101: 2
SNT-EX104/SNT-EX154: 4
SNT-EP104/SNT-EP154: None *
* Alarm sending is available only for the simple motion
detection function.
Sensor input 1: The external sensor that is connected to
sensor input 1 of the I/O port.
Sensor input 2: The external sensor that is connected to
sensor input 2 of the I/O port.
Sensor input 3: The external sensor that is connected to
sensor input 3 of the I/O port.
Sensor input 4: The external sensor that is connected to
sensor input 4 of the I/O port.
Tampering: An alarm that is triggered when the camera
detects vibration or shaking.
VMF: An alarm of the VMF detection function.
Motion detection: The alarm by the motion detection
function.
Click Detection, and the Motion detection menu is
displayed to allow you to set the motion detection
function (page 73).
Note
In the case that the synchronized preset position is
specified in Position at alarm in the Preset position
menu, the alarm event that happens when the camera
moves to the preset position will be invalid.
Effective period
Set the period during which alarm detection is effective.
Always: Alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule to display the setting menu for the
effective period. ("Setting the Schedule — Schedule
Menu" on page 72)
Alarm buffer
Select Use alarm buffer when you record the image/
audio at a specific time before or after alarm detection
(pre-alarm, post-alarm).
If you do not select the alarm buffer, only the image at
the moment of alarm detection is recorded.
Click Alarm buffer to display the Alarm buffer menu.
For details, see "Setting the Alarm Buffer — Alarm
buffer Menu" on page 73.
OK/Cancel
See "Buttons common to every menu" on page 27.
Periodical recording Tab — Setting
the periodical recording mode
You can set to record an image file (JPEG file) to the
built-in memory or USB memory periodically.
Periodical recording
Select On when you want to use periodical recording.
Image file name
Type the file name of the image to be recorded to the
memory using up to 10 alphanumeric characters, -
(hyphen) and _ (under score).
The actual image file name will be the specified image
file name with a suffix and the extension .jpg.
Recording Images in Memory — Image memory Menu
65
Hide quick links:
Advertisement
Table of Contents
