Sony SNT-EX101E User Manual page 68

Timer: Controls alarm output using the timer.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 72)
Sensor input 1
Select this option when you link the alarm output to an
external sensor that is connected to sensor input 1 of the
I/O port.
Sensor input 2
Select this option when you link the alarm output to an
external sensor that is connected to sensor input 2 of the
I/O port.
Sensor input 3
Select this option when you link the alarm output to an
external sensor that is connected to sensor input 3 of the
I/O port.
Sensor input 4
Select this option when you link the alarm output to an
external sensor that is connected to sensor input 4 of the
I/O port.
Camera tampering detect
Select this option when you link the alarm output to the
vibration/shaking detection of the camera.
VMF
Select this option when you link the alarm output to the
VMF detection function.
Motion detection
Select this option when you link the alarm output to the
motion detection function.
Click Detection, and the Motion detection menu is
displayed to allow you to set the motion detection
function (page 73).
Note
In the case that the synchronized preset position is
specified in Position at alarm in the Preset position
menu, the alarm event that happens when the camera
moves to the preset position will be invalid.
Alarm duration
Select the duration for which the alarm is output,
between 1 and 60 sec.
Effective period
This item becomes active when Mode is set to Alarm.
Set the period during which the alarm detection is
effective.
Always: Alarm detection is always effective.
68
Setting the Alarm Output — Alarm output Menu
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 72)
OK/Cancel
See "Buttons common to every menu" on page 27.