Download  Print this page

Starting The Software - Sony SNT-EX101E User Manual

Video network station.
Hide thumbs

Advertisement

Note
If you select Save in the "File Download – Security
Warning" dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.
If the message "Internet Explorer – Security Warning"
appears, click Run.
Program name
If the message "User Account Control – An unidentified
program wants access to your computer" appears, click
Allow.
The software installation starts.

Starting the software

When you start software such as SNC toolbox, the
message "User Account Control – An unidentified
program wants access to your computer" may appear. In
this case, click Allow.
Installing ActiveX Control
During installation of ActiveX Control, the information
bar or "Security Warning" may appear. In this case,
operate as follows:
If the message "Information Bar" appears, click Close.
If the information bar appears, click on the bar and select
Install ActiveX Control....
If the message "User Account Control – Windows needs
your permission to continue" appears, click Continue.
If "Internet Explorer – Security Warning" appears, click
Install.
Program name
The installation of ActiveX Control starts. When
installation is completed, the main viewer or the Motion
detection menu appears.
Configuring Windows Firewall
SNC toolbox or SNC audio upload tool may not operate
correctly depending on the configuration of Windows
Firewall. (No cameras are shown in the list even if they
are detected.) In this case, confirm the Windows
Firewall configuration as follows:
Example: In the case of SNC toolbox
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
"User Account Control – Windows needs your
permission to continue" may appear. In this case,
click Continue.
Assigning the IP Address to the unit
11

Advertisement

Table of Contents

   Also See for Sony SNT-EX101E

Comments to this Manuals

Symbols: 0
Latest comments: