Table of Contents
Advertisement
Outputting Audio Linked
to Alarm Detection
— Voice alert Menu
Click
Voice alert
in the Administrator menu to display
the Voice alert menu.
Use this menu to set the Voice alert function to output
audio from the line output jack of the unit when an alarm
is detected by the sensor input or motion detection
function.
You can output the audio from the speaker connected to
the unit in synchronization with an alarm event triggered
by the sensor input or the motion detection function.
The Voice alert menu consists of 3 tabs: Voice alert 1,
Voice alert 2 and Voice alert 3. You can configure an
individual audio file on each tab.
Notes
• Before using the Voice alert function, you need to save
the audio file to the unit using the SNC audio upload
tool stored in the supplied CD-ROM.
• For details on use of the SNC audio upload tool, see
page 95.
• This operation is not available on the SNT-EP104 or
SNT-EP154.
• Voice alert configuration is only available for CH1 on
the SNT-EX154.
Voice alert 1, 2, 3 Tab
File
Displays the name of the audio file saved in the unit.
"Not uploaded" is displayed dimly if no audio file is
saved.
To delete the audio file saved in the unit, click Delete.
Note
Before deleting an audio file, set Voice alert to Off.
Test
When an audio file is saved in the unit, you can check it
by playing it back.
Click Play to play back the audio file.
Voice alert
To use the voice alert function linked with the sensor
input or the motion detection function, select On.
Repeat
Select playback repeat time from 1 to 3.
Alarm
Select the alarm to be linked with the voice alert
function.
Tip
The number of selectable input terminals is as follows:
SNT-EX101: 2
SNT-EX104/SNT-EX154: 4
SNT-EP104/SNT-EP154: None *
* Alarm sending is available only for the simple motion
detection function.
Sensor input 1: The external sensor that is connected to
sensor input 1 of the I/O port.
Sensor input 2: The external sensor that is connected to
sensor input 2 of the I/O port.
Sensor input 3: The external sensor that is connected to
sensor input 3 of the I/O port.
Sensor input 4: The external sensor that is connected to
sensor input 4 of the I/O port.
Tampering: An alarm that is triggered when the camera
detects vibration or shaking.
VMF: An alarm of the VMF detection function.
Motion detection: The alarm detected by the motion
detection function.
Click Detection to display Motion detection menu to
allow you to set the motion detection function
(page 73).
Notes
• If voice alert is actively linked with a different alarm
event while another voice alert is occuring, the first
voice alert is canceled and the second is output.
• If two or three audio files are set to be output
simultaneously linked with the same alarm event,
priority is given in the order Voice alert 1, 2 then 3.
• In the case where a preset position is specified in
Position at alarm in the Preset position menu, the
alarm event that occurs when the camera moves to the
preset position will be invalid.
Outputting Audio Linked to Alarm Detection — Voice alert Menu
69
Hide quick links:
Advertisement
Table of Contents
