Table of Contents
Advertisement
Downloading Images
from the system
server Menu
FTP server
When you click
the FTP server menu appears. This allows you to set up
for the FTP server function, whcih finds a specified
image and audio file stored in the built-in memory
(about 8 MB) or USB memory (not supplied) inserted in
the camera, or downloads a file from the camera.
FTP server function
To activate the FTP server function, select On.
Selected root directory
Select the memory that contains the file you want to
download.
The current memory space is displayed on the right.
Built-in memory: Built-in memory of this unit
USB memory: USB memory inserted into the unit
Notes
• When Selected root directory is set to an option other
than Built-in memory in the Common tab of the
Image memory menu, "empty" is displayed in the
memory space box and you cannot access the built-in
memory.
• The frame rate and operability on the main viewer
may be reduced when you logged in to the FTP server
of this unit using the FTP client software installed in
the computer.
• USB memory cannot be used on the SNT-EP104,
SNT-EX154 and SNT-EP154.
OK/Cancel
See "Buttons common to every menu" on page 27.
— FTP
in the Administrator menu,
Setting the Alarm Output
— Alarm output Menu
When you click
Alarm output
menu, the Alarm output menu appears.
You can perform setting in this menu to control the
alarm output of the I/O port on the rear of the system in
conjunction with alarm detection and the timer.
The Alarm output menu consists of four tabs: Alarm
output 1, Alarm output 2, Alarm output 3 and Alarm
output 4.
Tip
• For details on connection of peripheral devices to the
alarm output of the I/O port, refer to the supplied
Installation Manual.
• The number of selectable input terminals is as follows:
SNT-EX101: 2
SNT-EX104/SNT-EX154: 4
SNT-EP104/SNT-EP154: None *
* Alarm sending is available only for the simple
motion detection function.
Note
This operation is not available on the SNT-EP104 or
SNT-EP154.
Alarm output Tab
Alarm output
To activate the alarm output function, select On.
Mode
Select the mode of the alarm output function.
Alarm: Controls alarm output by synchronizing it with
an external sensor input or the built-in motion
detection function.
When Alarm is selected, the items Sensor input 1,
Sensor input 2, Sensor input 3, Sensor input 4,
Tampering, VMF, Motion detection, Alarm
duration and Effective period become active.
Downloading Images from the system — FTP server Menu
in the Administrator
67
Hide quick links:
Advertisement
Table of Contents
