Date & time: The date & time suffix is added to the
image file name.
The date & time suffix consists of the year (2 digits),
month (2 digits), date (2 digits), hour (2 digits),
minutes (2 digits) and seconds (2 digits), and
sequential number (2 digits), thus adding a 14-digit
number to the image file name.
Sequence number: A sequential number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 are added to the image file name.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Type the interval at which you want to send an e-mail
periodically. You can set the hour (H) and minutes (M)
between 30 minutes and 24 hours (one day).
Set the period during which periodical sending will be
Always: Periodical sending is always effective.
Schedule: You can specify the period during which
periodical sending is effective.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 72)
See "Buttons common to every menu" on page 27.
Sending Images to FTP Server — FTP client Menu
Sending Images to FTP
— FTP client Menu
When you click
the FTP client menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. Using FTP client function, you
can send an image and audio file that has been shot and
recorded linked with the external sensor input or with
the built-in motion detection function to an FTP server.
The image file can also be sent periodically.
The FTP client menu consists of three tabs: Common,
Alarm sending and Periodical sending.
Common Tab — Setting the FTP
FTP client function
To activate the FTP client function, select On.
The frame rate and operability on the main viewer may
be reduced while a file is being transmitted by the FTP
FTP server name
Type either the FTP server name to upload still images
using up to 64 characters, or the IP address of the FTP
Type the user name for the FTP server using up to 64
Type the password for the FTP server using up to 64
To confirm the password, type the same characters as
you typed in the Password box.
in the Administrator menu,