Table of Contents
Advertisement
Control bar
The following operation buttons are available.
Setting
Play/Pause button
Trigger run button
Preset
Save still image button
Audio output volume slider
Control waiting time and control time for exclusive control
Exclusive control button
Camera list
The camera list is displayed when Camera list is set to
On in the viewer menu, and at least one camera is
registered in the unit list.
Operating the Camera
You can control pan/tilt, zoom and focus.
Notes
• This operation is not available on the SNT-EP104 or
SNT-EP154.
• To operate, make sure the connected camera is
configured correctly.
Controlling via the control panel
You can operate the camera direction, zoom, and focus
by using the control panel for the monitor image
currently displayed.
Pan/Tilt control
Click the arrow button in the direction in which you
want to move the camera. Keep it pressed to move the
camera continuously.
To return to the home position, click
Zoom control
Click
to zoom out, and click
Zooming continues while the button remains pressed.
Focus control
To focus on a nearby object, click
distant object, click
.
By clicking
optimum position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual (page 34).
.
to zoom in.
. To focus on a
, the focus is set to the
Operating the Camera
21
Hide quick links:
Advertisement
Table of Contents
