Accessing the System
Using the Web Browser
After the IP address has been assigned to the unit, check
that you can actually access the system using the Web
browser installed on your computer.
Use Internet Explorer as a Web browser.
Start the Web browser on the computer and type the
IP address of the unit in the URL address bar.
The viewer window is displayed.
Using the SSL function
The model on sale in China does not support the SSL
When Internet Explorer 6 is used
"Security Alert" dialog may appear according to the
status of the certificate. In this case, click Yes to
The viewer window is displayed (in SSL
When Internet Explorer 7 is used
When you enter the unit IP address, "Certificate Error"
may appear according to the status of the certificate set
on the system. In this case, click Continue to this
website (not recommended). to continue.
The welcome page appears (in SSL communication).
When "Allow HTTP connection for some
clients" (page 42) is checked
To use HTTP and SSL connections separately to access,
enter the following in the address box of the browser.
For HTTP connection
For SSL connection
When the viewer of the unit is displayed
for the first time
"Security Warning" is displayed. When you click Yes,
ActiveX control is installed and the viewer is displayed.
Accessing the System Using the Web Browser