Sony SNT-EX101E User Manual page 99

Recording/playback progress bar
You can check recording or playback progress with this
bar.
During recording, the far right of the bar represents
30 seconds, and the remaining recording time is
numerically displayed below the bar.
During playback, the length of the bar depends on the
recorded time.
(file open)
Click to select a previously saved audio file. You can
play the selected audio file or upload it to the system.
(save)
Click to save a recorded audio file to the computer.
Voice alert number select
Specify the voice alert number to which you want to
upload an audio file. For example, select 1 when
uploading to voice alert 1.
The name of the uploaded audio file is displayed to the
right of the number.
"Not uploaded" is displayed if no audio file is uploaded
to the video network station.
The audio file name will be "RecordedFile" + "Voice
alert number" + ".vof" if you upload an audio file
recorded using and not stored in the computer.
Note
The audio file name for the video network station
selected in the camera list is displayed here. To check the
uploaded file name, click on the video network station in
the camera list.
(upload)
Click to upload the recorded or selected audio file to the
video network station specified in the Setting tab. Only
one audio file can be uploaded to the video network
station at a time.
Note
Uploading a new audio file overwrites the audio file
previously uploaded to the video network station.
Click this button to hide the camera list. Click it again to
display the camera list.
Target camera(s) (Camera list)
Displays the cameras selected with the camera select
checkbox of the camera list in the Setting tab.
The list shows information and status of selected video
network stations.
IP address: Displays the IP address of a video network
station. "DHCP" is shown at the end of the IP
address when the IP address is obtained from a
DHCP server.
Tip
During SSL communication,
of the IP address of the video network station.
The model on sale in China does not support the SSL
function.
Model: Displays the model name of the video network
station.
Serial: Displays the serial number of the video network
station.
Progress: Displays the progress of audio file
transmission.
Status: Displays the current status of the camera.
Ready: The camera is ready for connection.
Inquiry: The video network station information is
being requested.
No func: The camera does not support the Voice
alert function.
Uploading: An audio file is being uploaded.
Fault: Audio file uploading failed.
No Privilege: The camera is not authorized to
upload audio files.
Succeeded: The audio file uploaded successfully.
Uploading a recorded audio file to the
video network station
Tip
Before operating, create an audio file and set the video
network station to upload using the Setting tab.
1
Click (recording) in the Voice alert tab to
start recording.
2
Click (stop) to stop recording.
Recording will stop automatically in 30 seconds.
3
Select the voice alert number.
4
Click (upload) to transmit the audio file to the
system.
Using the SNC audio upload tool — Transmitting Audio to unit
appears on the left side
99