Adjusting The Timer Function; Clock; On/Off Timer; Sleep Time - HP LD4200tm - Widescreen LCD Interactive Digital Signage Display User Manual
Hp ld4200tm lcd monitor user guide
Hide thumbs
Also See for LD4200tm - Widescreen LCD Interactive Digital Signage Display:
- User manual (80 pages) ,
- Quickspecs (7 pages) ,
- User manual (79 pages)
Table of Contents
Advertisement
Adjusting the Timer Function
Use the remote control to set the following timer options.
Clock
The Clock menu allows you to reset the clock manually if the current time is incorrect. To reset the clock:
1.
Press the MENU button and then use ▼▲ buttons to select the Time menu.
2.
Press the ► button and then use ▼▲ buttons to select the Clock menu.
3.
Press the ► button and then use ▼▲ buttons to set the hour (00~23).
4.
Press the ► button and then use ▼▲ buttons to set the minutes (00~59).
On/Off Timer
The on/off timer menu lets you set the monitor to automatically switch to standby at a pre-set time:
1.
Press the MENU button and then use ▼▲ buttons to select the Time menu.
2.
Press the ► button and then use ▼▲ buttons to select On/Off Timer.
3.
Press the ► button and then use ▼▲ buttons to set the hour (00~23).
4.
Press the ► button and then use ▼▲ buttons to set the minutes (00~59).
5.
Press the ► button and then use ▼▲ buttons to select On or Off.
Sleep Time
The sleep time menu lets you set the monitor power to automatically turn off when the time set by a user
is passed.
1.
Press the MENU button and then use ▼▲ buttons to select the Sleep Time menu.
2.
Press the ► button and then use ▼▲ buttons to set the hour (00~23).
3.
Press the ► button and then use ▼▲ buttons to set the minutes (00~59).
Auto Sleep
To set the monitor to switch to the off mode automatically after 10 minutes if Auto Sleep is active and
there is no input signal:
1.
Press the MENU button and then use ▼▲ buttons to select the Auto Sleep menu.
2.
Press the ► button and then use ▼▲ buttons to select On or Off.
NOTE:
In the event of a power interruption (disconnection or power failure), the Sleep Time clock must
be reset.
NOTE:
Once the On or Off time is set, these functions operate daily at the preset time. Off time function
overrides On time function if they are set to the same time. When On time is operated, input screen is
turned on as it was turned off.
28
Chapter 4 Operating the Monitor
ENWW
Advertisement
Table of Contents
