3.
Use the screws to secure the stand to the rear side of the product.
Figure 3-3
Connecting the Speakers (Sold Separately)
1.
Mount the speakers onto the product.
Figure 3-4
2.
Use the four Taptite D3 x 12mm screws to secure the speakers to the monitor.
Figure 3-5
ENWW
Securing the Stand to the Monitor
Mounting the Speakers
Securing the Speakers to the Monitor
Connecting the Speakers (Sold Separately)
5
Need help?
Do you have a question about the LD4200tm - Widescreen LCD Interactive Digital Signage Display and is the answer not in the manual?