Screen Adjustment Options; Using The Auto-Adjustment Function - HP LD4200tm - Widescreen LCD Interactive Digital Signage Display User Manual

Using the Auto-Adjustment Function

You can optimize the screen performance for the VGA (analog) input by using the Auto/Set button on
the monitor (AUTO button on the remote control) and the auto-adjustment pattern software utility on the
CD provided.
Do not use this procedure if the monitor is using an HDMI to DVI input. If the monitor is using a VGA
(analog) input, this procedure can correct the following image quality conditions:
●
Fuzzy or unclear focus
●
Ghosting, streaking or shadowing effects
● Faint vertical bars
●
Thin, horizontal scrolling lines
●
An off-center picture
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the
If the result is not satisfactory, continue with the procedure.
3. Insert the CD in the disc drive. The CD menu is displayed.
4. Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5. Press the
image.
6. Press the
22 Chapter 4 Operating the Monitor
Auto/Set button on the back side of the monitor panel.
Auto/Set button on the back side of the monitor panel to produce a stable, centered
ESC key or any other key on the keyboard to exit the test pattern.
ENWW