15. Color Temperature (Command : U)V; Abnormal State (Command : Z) - HP LD4700 - Widescreen LCD Digital Signage Display User Manual

Data Min : 00H ~ Max : 64H
Balance : L50 ~ R50

15. Color Temperature (Command : u)v

To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Medium
1 : Cool
2 : Warm
3 : User
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0 : Medium
1 : Cool
2 : Warm
3 : User

16. Abnormal state (Command : z)

Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
0 : Normal (Power on and signal exist)
1 : No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
8 : Turn the monitor off by off time function
ENWW Transmission / Receiving Protocol 51