Auto Configure (Command: J U); Key (Command : M C); Elapsed Time Return (Command : D L) - HP LD4200tm - Widescreen LCD Interactive Digital Signage Display User Manual
Hp ld4200tm lcd monitor user guide
Hide thumbs
Also See for LD4200tm - Widescreen LCD Interactive Digital Signage Display:
- User manual (80 pages) ,
- Quickspecs (7 pages) ,
- User manual (79 pages)
Table of Contents
Advertisement
[j][p][ ][Set ID][ ][Data][Cr]
Data 1H : Inversion
2H : Orbiter
4H : White Wash
8H : Normal
10H : Dot Wash
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. Auto Configure (Command: j u)
To adjust picture position and minimize image shaking automatically. It works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set auto configure
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command : m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to the IR Codes Table.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
20. Elapsed time return (Command : d l)
To read the elapsed time.
ENWW
Transmission / Receiving Protocol
59
Advertisement
Table of Contents
Need help?
Do you have a question about the LD4200tm - Widescreen LCD Interactive Digital Signage Display and is the answer not in the manual?