Setup Flow - Epson H6000III - TM Two-color Thermal Line Technical Reference Manual

3.2 Setup Flow

You have to set up your printer to use it. And you can adjust some feature by customizing them.
This section describes the setup.
The set up flow of preparing to use printer is below..
Note:
When you use OPOS (OCX driver from EPSON), Advanced Printer Driver, or JavaPOS, you need to
install the driver. When you use ESC/POS commands, you don't have to install drivers. For information
on these drivers, see "Control Method" (page 2-1).
Rev. E
Printer setup (See "Printer setup," page 3-8)
Printer customizing
Complete set up
TM-H6000III Technical Reference Guide
(See "Customizing," page 3-18)
Driver setup
❏ APD
❏ OPOS
❏ OPOS for .NET
❏ JavaPOS
Setup 3-7